Try Pro free

Moonshots · 3 min · Nov 16, 2026

Figure built its own actuator after a supplier’s part was too large

The first actuator Figure sourced met its specifications but was three times too large and too heavy, so the team built its own.

In this episode

Full analysis
  1. 16:19China's robot dance demos do not prove practical autonomyPro pick 3 min
  2. 24:06Figure runs its robot intelligence on board to meet latency needs5 min
  3. 1:01:00Figure expects lights-out robot manufacturing within five years4 min
  4. 3:19Figure will wait for a high-quality home robot before launch6 min
  5. 12:18Figure’s coffee-cup demo helped validate neural nets in robotics4 min
  6. 36:48Figure built its own actuator after a supplier’s part was too large3 min
  7. 1:12:11Figure estimates Baku capacity at over 40,000 robots a year3 min
  8. 1:43:27Compute bids turned against Figure as GPU supply tightened5 min
“It needs to be tens of dollars at the most.”
Brett Adcockat 38:39 · Moonshots
38:39

Takeaways

  1. The sourced actuator was about three times too large and too heavy.
  2. Figure needed actuator costs in the tens of dollars, not hundreds.
  3. Building in-house gave Figure control over fit, thermals and firmware.

About this segment

The first actuator Figure sourced met its specifications but was three times too large and too heavy, so the team built its own. Brett Adcock explains the engineering work that integration required.

Brett Adcock

Brett Adcock is founder and CEO of Figure AI.

Founded Figure AI to build general-purpose humanoid robots; previously co-founded Archer Aviation and Vettery.

  • Peter Diamandis, Host · Founder, XPRIZE

    Co-founded Singularity University and founded Zero-G; co-wrote the books Abundance and Bold.

  • Dave Blundin, Host · Founder & GP, Link Ventures

    Has co-founded 23 companies; founding CEO of Vestmark and chairman of insurance marketplace EverQuote.

From “Robotic Deep-Dive: Beating China, the Race Against Tesla, & New Robotics Timeline With Brett Adcock”, Nov 16, 2026. Watch the full episode

Transcript

Transcribed by machine (Whisper) from the episode’s audio, so a word may be off here and there.

  1. 36:51

    A friend of mine has a company called TouchLab that basically built out the most advanced touch systems for gathering data. Are you doing that all in-house right now? We do all in-house, yeah. The problem with a lot of these external groups is we have to be production-ready. They have to work at a really high reliability. It's going to work perfect for our system. It's going to be at low cost. We need to rev it and fix it, we understand it. We need to understand the firmware and embedded software around it.

  2. 37:21

    We need to understand thermals around it. It might seem like we can just go off and buy something and toss it in the robot and it makes this magical experience. It's never the Same thing from how Elon concluded, you need to vertically integrate everything possible. It never fits. You can't even make it fit in the CAD. Let alone, the thermals don't work, or it's not the right bus comms, or the power loads are too high, or the cost is unfeasible. It doesn't work a pass like five or six times, and it breaks.

  3. 37:51

    We have some of the best engineers in the world here that want to move really fast. So, then we're working with another group that isn't beholden to us to be able to do work, and it becomes really tough. That's what happened with Figure 1. We went out hoping to go get the stuff and pull it all in on the supply chain side, and it all broke down really fast. We bought the first actuator. We brought it in. I think we still have it here.

  4. 38:12

    It's like, OK, we're going to use this for an elbow. It had all the right stuff in it. It had a torque cell, the right encoders, the right gear boxes, and the speed and torque profiles of the actuator were in the right place. We got it, and it was just this big. It was literally like this giant block. And it was for your elbow. From China, probably. And we were like, what do we do with this? It's just the best one on the market.

  5. 38:34

    And it's literally three times too big and three times overweight. And it was really expensive. We can't have it hundreds of dollars. It needs to be tens of dollars at the most. And anyway, we had to go build everything ourselves. Somebody in that room says, OK, Brett, we're going to wind our own actuator. That's not a small step. No, we sat there, we said, this really sucks. We have to go do it ourselves.

  6. 39:00

    Is there any way we're wrong about this because we don't want to have to go do this? And we sat there for a while trying to figure out every other possible thing to do besides not build it. If you build it yourself, it really sucks. You have to have a firmware person, you have to have an electrical person, you have to have a thermals person, probably some work in embedded software, you have to work in mechanical structures, you have to work in the motor, which is the rotor and stator and gearbox, box. You probably need a gear designer at that point. Then you need somebody to put this all together in a really small package, because our design team wants it to look really good. Then it needs to be able to move around, which means the wire and the cabling and all the harnessing and connectors all have to be really dynamic and not ever mess up.

  7. 39:40

    Then you've got to figure out how to get the heat out of the system. Then you've got to figure out where to put them and how to daisy chain them all now together to build a functional actuator inside a shoulder, or leg, or hip, or whatever you're going to do, and then it becomes like, man, this isn't really a go-get-it-and-you-put-it-together plan. This is like a, it's got to be done from scratch.

  8. 40:00

    Make something better on the engineering side, it could get bigger. And if it gets bigger, you can't have your elbow because it's too big, or your knee. And sometimes it clashes with the rest of the robot. And then it doesn't look great. You want a really high aesthetic product.